Characteristics and uses of brass flat wire

Copper flat wire has good mechanical properties, thermal state of plasticity is good, the cold plastic fair, good machinability, brazing and soldering, and it is also very corrosion resistant, but easy to produce corrosion cracking, then there is the price of this metal material also is very affordable, its wear resistance, good ductility, and no magnetic force, so its application is very extensive.

As a more common variety of application, the higher the zinc content of brass flat wire, its strength is higher, the shape is slightly lower, the zinc content of brass wire used in industry is not more than 45%, the zinc content is high again will produce brittleness, so that the performance of the alloy deteriorates. The addition of 1% tin in brass flat wire can significantly improve its resistance to sea water and Marine atmosphere corrosion, therefore, this material has "Navy brass wire: Tin can improve the cutting performance of brass wire, lead brass wire is often said to be easy to cut gb copper, the main purpose of adding lead is to improve chip processing and resistance to dense line, and lead has little influence on the strength of brass wire.

At the same time, the application of brass flat wire is also very wide, such as CNC foam cutting machine processing, not suitable for 24H boot users, because the processing efficiency for these users, is not a problem; Users who have not high requirements for processing accuracy, especially for surface quality goods; There is the processing of small size, thickness based users, because the workpiece adjustment time than the processing time is relatively tight, chip time is short, for the processing efficiency is not very obvious.