Knowledge of storage method of purple copper bar

Small and medium-sized manufacturers in the purchase of purple copper rod, there will be a difficulty, is very easy to produce some rust-like black spots. Today we're going to learn about how it's stored.

1. We need to set up the warehouse. The temperature of placing copper is 15 to 35 degrees in the middle. If the water vapor concentration is too much, such as the plum rain season in coastal areas, some moisture-proof desiccant can be added to maintain the air circulation of the warehouse.

2. In the warehouse, acid raw materials and alkali raw materials will cause chemical reaction according to gas and copper, which is very bad for the purple copper rod itself.

3. Once the surface of the copper tube is found to be similar to the corrosion of this situation, you can rub it with the linen copper core line, the metal brushed purple copper plate or the sea pure cotton cloth without water can be wiped down, not with cooking oil or lubricant.

4. In the warehouse, it is found that there are cracks or serious corrosion of the purple copper bar, try to place it separately, the higher the height, the better to reduce the dry humidity of the gas. There is no need to mix and place with other copper bars to prevent the influence between each other. The metal brushed purple copper plate causes chemical reaction.

5. Different specifications and models, different production batches of red copper, because the composition of pure copper may not be the same, it is suggested to separate out and put, in the case of standard, storage by warehouse. The surface of the purple copper rod is likely to have the acid and alkaline solution, so it is necessary to avoid the storage of raw materials such as rubber materials.

Safe storage of purple copper rod, can improve its application deadline and ensure its performance parameters, can avoid a lot of unnecessary harm.