Phosphor bronze rod anticorrosion solution

As a kind of copper material, phosphor bronze rod itself is not easy to rust, but in the process of use, some rust-like components can always be seen. The anti-corrosion treatment of phosphor bronze rod can be carried out from the following aspects:

After the end of the electric welding of phosphor bronze rod, the welder generally needs to lift up about 5 minutes, which is especially crucial for the rust prevention treatment of phosphor bronze rod. We can wipe a part of the connection with a wet towel, that kind of benefit is that it can not only improve the stability of the welding position, but also to weld the surface slag, in order to resist corrosion. Under the condition of standard, it is also a reasonable way to prevent rust by blowing the inner wall of phosphobronze rod with inert gas to keep it dry.

Oxidation resistance can be applied to the welding of phosphor bronze rod. The copper in the phosphor bronze rod reacts easily with the water and oxygen in the air. There is no oxidation resistance treatment, once long-term exposure to the air, especially the humid air, rust is inevitable. If in order to prevent rust well, copper corrosion resistant spray paint can be used for spraying. This kind of raw material is very similar to paint, but it is not paint. It is attached to the surface of phosphor bronze rod, which is a very good oxidation resistance maintenance for phosphor bronze rod.

When rust occurs on the surface of phosphobronze rods, we need to classify and place the rusty phosphobronze rods without placing them together with other unrusted ones. We should pay close attention to the detection of gas moisture content in the storage area. Some of the surface rust, we can simply use a towel to clean, gently wipe down can be. If the rust covers a very large area, we first clean the phosphobronze rod, remove stains or oxide skin, and wipe it with copper corrosion resistant spray paint.

The rust of phosphor bronze rod is a chemical substance after copper oxidation. After electric welding, it is necessary to carry out targeted maintenance on phosphor bronze rod.