What should copper bar manufacturers pay attention to when processing copper bars

Copper bar line should be reasonable according to the position of the hole line, reduce unnecessary lines; Pay attention to the strength of the hand, so that there is no scratch on the surface of the copper bar, see the size marked on the drawings, the size of the aperture, when feeding the copper bar processing machine, we should feed according to the specifications of the copper bar processing machine; Before blanking, use caliper to measure the material width and thickness of copper bar. Ensure that the material meets the requirements, and then place the copper bars neatly to avoid scratches.

When the copper bar needs tapping, it is necessary to determine whether the aperture of the bottom hole meets the requirements, and then select the corresponding tap tapping. When drilling, we should see clearly the size of the aperture of the copper bar file, and use the corresponding size of the drill to drill; After drilling copper bars should be neatly placed;

Copper bar processing machine pressure riveting insert specifications and pressure on the surface of the copper bar; In pressure riveting machine to choose the appropriate pressure, avoid to crush pressure overshoot copper platoon, pressure riveting machine or copper platoon to protect the surface, to avoid the copper platoon cut and bruised, copper platoon to choose corresponding mold, according to the different thickness after adjusted the mould, must use waste, try a knife, avoid bad product produce, bending workers after folded, should be doing, Check with the inspector after confirmation.Operators should not wear gloves when drilling and keep their hands away from the drill bit.